New Auckland Branch Location 277 Church Road Onehunga

Home | Grundfos | End Suction Close Coupled Single Stage | NBGE 200-150-250/230 EUP CAE2CBQQE

NBGE 200-150-250/230 EUP CAE2CBQQE

Close-coupled pumps according to ISO 2858 with MGE motor

Non-self-priming, single-stage, centrifugal volute pump designed according to ISO 5199 with dimensions and rated performance according to ISO 2858 (16 bar). Flanges are PN 16 with dimensions according to AS2129 table E. The pump has an axial suction port, radial discharge port, horizontal shaft and a back pull-out design enabling removal of the motor, motor stool, cover and impeller without disturbing the pump housing or pipework. The unbalanced rubber bellows seal is according to DIN EN 12756. The pump is close-coupled to a fan-cooled, permanent-magnet synchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement.

Suitable for:

More Single Stage Pumps

Petrol & Diesel Drive Pumps

Nuphlo Petrol/Diesel Drive Pumps

For Pumping Water & Chemical Products on Smaller Road Tankers Nuphlo® Developed for smaller road

Hydraulic Drive Pumps

Nuphlo Hydraulic Drive Pumps

For Dairy Road Tanker Requirements Nuphlo® Pumps and Transport Hydraulic Solutions have worked in conjunction

Liquid Ring Pumps

Nuphlo Liquid Ring Pumps

Self-Priming, Handling a Similar Range of Liquids to Centrifugal Pumps The Nuphlo® Liquid Ring pump

Waveplate Positive Displacement Pumps

Nuphlo Waveplate Positive Displacement Pumps

Gentle Handling of Shear Sensitive, Fragile & Viscous Food Products Nuphlo’s new generation Waveplate positive

PD20 Flexible Impeller Pump

PD20 Flexible Impeller Pump

PD20 Flexible Impeller Pump Specifications: Inlet diameter: 50mm (2”) Outlet diameter available: 50mm (2”) Maximum

PD15 Flexible Impeller Pump

PD15 Flexible Impeller Pump

PD15 Flexible Impeller Pump Specifications: Inlet diameter: 40mm (1½”) Outlet diameter: 40mm (1½”) Maximum capacity

Nuphlo Flexible Impeller Pumps

Nuphlo Flexible Impeller Pumps

Self-Priming, handling viscous products in Food, Beverage, Dairy & Pharmaceutical Nuphlo® range of semi positive

Model C250 Centrifugal Pump

Model C250 Centrifugal Pump

Model C250 Centrifugal Pump Specifications: Maximum capacity @ 2850 rpm: 200m³/hr Maximum pressure @ 2850

Model C150 Centrifugal Pump

Model C150 Centrifugal Pump

Model C150 Centrifugal Pump Specifications: Maximum capacity @ 2850 rpm: 24m³/hr Maximum pressure @ 2850

Model C120 Centrifugal Pump

Model C120 Centrifugal Pump

Model C120 Centrifugal Pump Specifications: Maximum capacity @ 2850 rpm: 18m³/hr Maximum pressure @ 2850

Nuphlo Centrifugal Pumps

Nuphlo Centrifugal Pumps

Used for a range of Liquid Food Products including Beverages, Cream, Milk Nuphlo® best features are

Nuphlo

quality stainless steel pumps. Nuphlo® (pronounced “new flow”) stainless steel pumps are successfully deployed in

Super Betsy

SuperBetsy

Superbetsy – the best mobile independend pumping system on the market Reliable | Efficient |

Arla achieves 481,800 kWh energy savings in critical water supply systems

Arla achieves 481,800 kWh energy savings in critical water supply systems

Arla achieves 481,800 kWh energy savings in critical water supply systems Arla Foods, one of

Grundfos Industry Case Carlsberg

Carlsberg taps into process water reuse with onsite treatment

Carlsberg taps into process water reuse with onsite treatment Carlsberg brewery wants to cut its

industry-case-scottish-sea-farms-ewen-and-mark-at-booster-set-hero-master

At Scottish Sea Farms salmon hatchery thrives with reliable pumps

At Scottish Sea Farms salmon hatchery thrives with reliable pumps Scottish Sea Farms wanted more

Grundfos SBTi

Sustainability at Grundfos

Sustainability at Grundfos At Grundfos, sustainability is at the core of everything we do and

Heated process water is used to pasteurise beer after it has been sealed in cans and bottles.

Case Studies

Hallmach is an ELITE Industry Partner with Grundfos and we take great pride is displaying

Science-Based Targets initiative (SBTi)

Unlock the Future of Sustainability with Hallmach, ELITE Industry Partner & Grundfos – the world’s

Hydro-Transport Food Pumps

Hydro-Transport Food Pumps

Cornell Pumps Save Costs! Cornell engineers understand the important role food handling pumps play in

Cornell Hot Liquid Pump

Cornell Hot Liquid Pump

Pumps for Hot Liquids Cornell Pump’s series of hot liquids pumps boasts robust construction, proved

Cornell Pumps

Cornell

Hallmach is a leading distributor for Cornell Pumps. Cornell pumps are a great solution for

Tuma

Tuma Line

Submersible Motors for Screw Centrifugal Pumps Hidrostal submersible pumps, also suitable for dry installation are

M-Macerator

M – Macerator

Built to Shred Solid or fibrous components in pumped media can quickly represent a hazard

Seepex SCT

SCT – Smart Conveying Technolology

Continuous Ongoing Developing The patented Smart Conveying Technology (SCT) ensures the fastest maintenance possible resulting

N - STANDARD PROGRESSIVE CAVITY PUMPS

N – Standard Progressive Cavity Pumps

The Universal Basis The N module forms the robust basis for all SEEPEX progressive cavity

Tsurumi U Series

U SERIES

Cutter Pump Tsurumi’s U-Series pumps provide exceptional capabilities for those small to mid-range applications in

Tsurumi B Series

B Series

Submersible Pump Our B Series non-clog pumps are used primarily in municipal water supply stations

Tsurumi C Series

C Series

Cutter Pump Tsurumi C Series Cutter Pump™ is solids handling non-clog submersible pump with a unique

Tsurumi Pumps

Hall Machinery is proud to announce the arrival of the Tsurumi Pump Ranges. Contact us

Hall Machinery Ltd. offers a complete sales and service package from a foundation of technical expertise and over 50 years of professional experience.

Christchurch

Auckland

Dunedin & Southland

Wellington